autocom Kit SP-A Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 20

background image

1x

Super Pro Automatic

, bike powered, logical mixing and control hub unit

1x

Rider’s noise cancelling stereo headset with plug-in ambient noise sensor

1x

Passenger’s noise cancelling stereo headset

2x

Coiled headset extension leads

1x

Deluxe bike fitting kit with on-bike socket holders and dust caps

1x

Standard 2000mm phone leads

1x

Standard 2000mm stereo music lead

INSTRUCTION MANUAL
and WARRANTY

It is

very important

that you fully read and understand all of

these instructions before installation and use.

This system is designed for domestic motorcycle use only.

2015
2110
2113
2138
2422
2176
2245

Kit SP-A

includes:

Kit SP-A

Super Pro Automatic

HUB

IMPORTANT NOTE:

PLEASE ASK

your supplier to personally check with you that this kit contains ALL the parts listed

above before you leave the shop!

Autocom UK has carefully checked that all of the parts listed above are supplied in this kit at the
time of packing and shipping; however we also train our suppliers to check and confirm with you (in
the shop) that you have all of these listed parts supplied in your kit before leaving the shop. Because
of this thorough triple check quality control method Autocom UK cannot accept any claims for
missing parts once you have left the shop.

This product is intended for sale ONLY from authorised retail premises by trained authorised
Autocom dealers, where your supplier has provided you with high quality hands on demonstration
and advice about the products before you purchase. This product is not to be sold/purchased via
mail order etc or from any dealer who has not/or cannot provide you with high quality face to face
hands on demonstration and after sales service and support.

If this product was supplied to you by mail order, we ask that you please contact
[email protected] or telephone: +44 (0)1926 431249 and let us know who your supplier
was, such that we can ensure that ALL of our customers receive the highest standards of supply and
support that our customers, products and brand deserves.

Please fill in and return the product registration on the inside back cover.

Super Pro Auto Instructions 8/5/09 2:24 pm Page 1

1
2
3
...
»

Содержание Kit SP-A





















Отзывы:

Нет отзывов

Похожие инструкции для Kit SP-A

Бренд: Waycon Страницы: 8

Бренд: Dayi Motor Страницы: 15

Leaf Wetness Sensor

Бренд: Davis Instruments Страницы: 2

M-Class Mark II M-4206

Бренд: Datamax Страницы: 22

Бренд: DataCard Страницы: 2

7500DX - Phaser Color LED Printer

Бренд: Xerox Страницы: 5

F 850 GS Adventure 2019

Бренд: BMW Motorrad Страницы: 346

Retrotech RTX-68D-CHG

Бренд: Dakota Digital Страницы: 4

Бренд: Romik Страницы: 6

Бренд: Kensington Страницы: 82

Бренд: Honda Страницы: 104

Бренд: PullRite Страницы: 10

Бренд: Viking Страницы: 1

Бренд: Compass Страницы: 16

Бренд: ZipKord Страницы: 2

Бренд: Doro Страницы: 9

Бренд: GAS GAS Страницы: 72

531s - Transducer

Бренд: Garmin Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды