AUTOCAR Xspotter 2014, Руководство оператора

Страница: 70 / 118

Headlight Switch
The Headlight Switch (Figure 93) controls
parking lights and headlights. It is a three-
position toggle switch, turning on parking lights,
cab marker lamps and taillights in the middle
position, and turning on headlights in the upper
position. The lower position turns all lights off.
Figure 93
The headlights are of the halogen sealed beam
type. If one of the lights is not functioning,
replace the whole lamp.
Daytime Running Lights (DRL) are standard
on DOT/EPA vehicles. They are automatically
switched on when the park brakes are released
(ignition must be ON) and will stay on until the
park brakes are applied or the headlights are
switched on.
Work Light Switch
A work light may be located on the top of the
cab, facing rearward. To operate the light press
the top of the Work Light Switch (Figure 94)
move the switch up. The light will stay on until
the switch is returned to the OFF position.
Work lights are mounted high on the cab for
work behind the cab.
The switch is typically located in the center of
the overhead instrument console.
Figure 94
Rotating beacon Switch
An optional rotating beacon is located on top
of the cab. The Beacon Switch (Figure 95) is
located on the overhead instrument console.
Depress the top of the switch to activate the
roof-mounted beacon.
Figure 95
877-973-3486 AWE 00054 Rev. 002 58
ACTT Xspotter Operator Manual