AutoAnchor AA702, Руководство пользователя

Страница: 31 / 57

30
Turn the AA710 remote console off.
Hold together to access the Set up menu.
Scroll to Windlass.
Select Windlass.
3.6 WINDLASS SET UP FOR CHAIN COUNTING
For accurate chain counting you must set up the AutoAnchor with the following information
for your windlass.
3.6.1 TO ACCESS THE WINDLASS SET UP
3.6.2 SET DOCKING DISTANCE
Note: If the dual speed option is enabled the windlass will be in
slow speed from this point.
Defaut = 1.5m or 4ft. Minimum setting = 1m or 3.3ft.
This is the point during retrieval when the windlass will stop.
Complete retrieval using manual operation.
Scroll to Docking distance.
Select docking distance.
Increase or decrease the docking distance.
Save and return to Windlass Setup
.
Setting:
3.6.4 SET RODE
Scroll to Rode.
Select Rode.
Select “Chain only” or “Rope and chain” and follow the
instructions below to enter the settings for the rode selected.
3.6.3 SET TOTAL RODE LENGTH
Add total length of chain plus total length of rope
Defaut = 60m or 196ft. Minimum setting = 10m (33ft)
or
OFF to operate as a counter only.
Scroll to Total rode length.
Select Total rode length.
Increase or decrease the value in meters or feet.
Save and return to Windlass Set up.
Setting:
Setting: