AutoAnchor AA702 Скачать руководство пользователя страница 24

Страница: 24 / 57

3.4.3 SET KEY BEEP

- Default: Beep On

Scroll to Key beep.

Save Key beep on or off.

Return to the General Menu.

3.4.2 SET UNITS

- Default: Meters

Select units.

Scroll to select meters, feet or fathoms.

Save.

Return to the General Menu.

3.4.4 SET AUTO OFF TIME -

Default: 5 Minutes

Adjustable from 4 - 20 minutes.

If you have more than one console you must set the

time for each console.

Use this setting to extend the time before the AA710 console automatically switches off.

Note: Extending the time will shorten the life of the batteries.

Select Auto off time.

Increase or decrease the time.

Save and return to the General menu.

Return to the Set up Menu and press

again to return to the Start Screen.

Do not use this setting unless you need to select a clear channel to avoid
interference.

Turn OFF all consoles prior to commencing this.

Channel changing should only be carried out

close to the base station.

The procedure

can take up to 20 seconds to complete. It may take two attempts to select the new channel.

If contact with the base is lost - try again. The console will then scan for its base and

re-allocate the system to the new channel.

Additional consoles must all be changed to the new channel using this procedure. Slave

base stations will follow the master automatically.

3.4.5 WIRELESS CHANNEL -

Default: Channel 2

From the Set Up Menu:

Select Wireless channel

Increase or decrease the channel number

When the process is ﬁnished the unit

automatically returns to the Set up Menu.

Содержание AA702


























































Результаты поиска

Содержание AA702

Отзывы:

Бренды по названию

Популярные бренды

AutoAnchor AA702, Руководство пользователя

Результаты поиска

Содержание AA702

Отзывы:

Бренды по названию

Популярные бренды