Truma Combi 4E / Truma Combi 6E
The Combi E Gas Heater is a warm air heater
with an integrated hot water boiler. The unit
can operate on liquid gas (LPG) or 230V mains
electricity. The heater can be used in ‘Winter’
mode that will produce warm air heating and
hot water, and ‘summer’ mode that will
produce hot water only.
Before operating the heater for the first time
ensure that the 12V system is turned ‘ON’ on the
control panel over the doorway, and that the gas
cylinder, and isolation valve are turned on.
To use the heater on 230V the Motorhome
must be plugged into the mains supply, with
the isolation switch in the ‘ON’ position.
TRUMA CP PLUS CONTROL PANEL
1
=
Display
2 = Status line
3 = Menu line (above)
4 = Menu line (below)
5 = Display of mains voltage 230 V (shore
power)
6 = Display timer
7 = Settings / values
8 = Control knob / push
The control knob / push button (8) is used to
select menus in the lines (3 + 4) and configure
the settings. These are shown via a display (1)
with a lighted background. Pressing the
Back button (9) takes the user back out
of the menu again.
Control knob / push button
The control knob / push button (8) is used to
select and change set values and parameters;
these can be saved by clicking the control knob /
push button. Selected menu items will flash.
32
www.auto-trail.co.uk
Truma Combi 4E / 6E