www.autotest.net.au • 61-63 Parsons St, Kensington VIC 3031 • tel +613 88403000 • [email protected]
Innovative Vehicle Testing & Diagnostic Products
FAQ
Auto
Test
Workshop Pro Tablet
When the BrakePro app on the Workshop Pro
starts, it shows “Looking for GPS Signal’ for a
long time and I can’t use the unit.
Your unit is having trouble acquiring a signal, take the
unit outside. Alternatively connect your unit to a WiFi
network to assist in establishing a connection, this can
reduce start up time considerably.
My brake softwear is expired. How do I
reactivate the it?
Through the Workshop Manager App. You will
need to make sure you have downloaded this, and
refreshed this app and the Brake Pro app. You will
need to calibrate and pay for your licence ever 12
months.
How do I know what version of software I have?
On your WorkshopPro, go to:
SETTINGS > ABOUT > VERSION
(See Fig 1 below)
Where can I find my Serial Number?
On your WorkshopPro, go to:
SETTINGS > ABOUT > TABLET SERIAL
(See Fig 1 below)
Where is the user manual?
The user manual is stored inside the USB drive that
came in the box as a PDF file. The manual can be
download from our website as well -
https://autotest.
net.au/product/autotest-workshop-pro-10/
When should I calibrate my Workshop Pro?
It is recommended and required that you go through
the calibration procedure every time you reactivate
the unit. *IN NSW YOU MUST SEND YOUR WORKSHOP
PRO AND PEDAL EFFORT SENSOR TO US FOR YEARLY
CALIBRATION
When do I need to send in my Workshop Pro?
You do not need to*. If you are having issues with the
Workshop Pro (i.e. Won’t charge or won’t turn on),
call our service line (03 8840 3016) for advice before
sending your unit back. Otherwise you can take your
device back to who you purchased it from i.e. your
nearest Burson Auto Parts or CD&E.
My unit prompts me to update the BrakePro app
but gives me an error when it goes to install it.
Contact AutoTest Service Team and they’ll walk you
through correcting this issue.
Figure 2: Workshop Pro in position ready for testing.
If the unit is moving in the seat, place on the floor of
the passenger seat. Supplied velcro will secure in place.
Figure 1: The About screen shows your softwear version
number, tablet serial number, android ID, and your GPS
location zone.
More......>
PAGE 2/3
