www.autotest.net.au • 61-63 Parsons St, Kensington VIC 3031 • tel +613 88403000 • [email protected]
When activating my unit I get an error such as
‘Address field too long’ or similar.
Please check your address, if your street address is very
long you may need to abbreviate it. Do not use Special
Characters such as Commas or Slashes as these will
trigger errors, just leave a Space in their place when
possible.
The app is running slowly when sorting out stored
tests.
Please clean up tests regularly by transferring them to
the computer using the usb cable.
The time on my unit is wrong, how do I fix this?
Change the time to AUTOMATIC if you had changed it
manual. Or if it’s on network time but that is incorrect,
connect to a network to get an updated time.
Maybe your Timezone is wrong, so swipe up on the
bottom of the screen and press the Circle button. Once
you’re on the home screen press the circle with the six
dots in it to open up the list of apps. Open ‘Settings’ and
scroll down to Date & Time under System. Switch off
Automatic Time Zone if it’s on and then set correct Time
Zone manually if that is wrong.
My results are in the wrong units, how do I change
them?
Open Settings from the apps main menu and then select
Test Result Settings. Choose your desired Units and
then press either the house or gears icons to save your
choice. You can also change the units for deceleration
on the test results screen by pressing on the deceleration
readings and choosing from the menu that pops up.
Why am I getting a speed error?
The Workshop Pro is moving relative to the vehicle.
This is a common error when the unit is not secured
properly to the vehicle.
See Figure 2 on previous page
- The supplied velcro will stop your Workshop Pro from
moving in the seat, or if you have leather seats, place on
the floor of the passenger side.
Never
hold in your hand for the test, or between your
legs, or on the floor of the driver’s side.
Innovative Vehicle Testing & Diagnostic Products
FAQ
Auto
Test
Workshop Pro Tablet
How do I delete a saved result?
To delete individual saved test results, open Database on
the main App menu. Hold your finger down on the test
you want deleted and select ‘Delete Test’.
How do I turn the power on my printer?
Press and hold POWER button down for 2-3 seconds, or
until the power indicator light turns red.
Why the bluetooth printer is not connecting?
When connecting it takes time for the printer to pair, up
to 20 seconds. You will see the blue light flashing when
it has paired. If the printer still hasn’t paired, please
restart the tablet and make sure bluetooth is turned on.
Restart the bluetooth printer and make sure it is charged
up. Check if the bluetooth printer is paired by going to
Settings > Bluetooth.
My print-outs are printing faded. What should I
do?
This means that the printer is almost flat. Charge you
printer, and it will print darker.
What does the blue blinking light on my printer
mean?
That the battery is almost flat, the power indicator
blinks in a blue colour. This means you must CHARGE
the battery.
How do I correctly charge my printer?
Refer to your User Manual point 3.2.7 BATTERY
CHARGING on your USB stick, or download from our
website -
https://autotest.net.au/product/autotest-
workshop-pro-10/
Can I use the printer while charging it?
Yes you can.
PAGE 3/3
