SAFETY
Carefully read all operating instructions before using the DM-46
Wear eye protection when working around batteries.
Keep sparks, flames, or cigarettes away from batteries.
Keep hair, hands, and clothing as well as tester leads and cords
away from moving blades and belts.
Provide adequate ventilation to remove car exhaust.
WARNING
: If the clamp meter is used in a manner not specified
by the manufacture, the protection provided by the clamp meter
may be impaired.
EN 61010-2-032
CAT II 600V
CAT III 300V
Pollution Degree2
Definition of Symbols
on the DM-46 and in
the manual.
Caution: Refer to
Accompanying
Documents
Caution: Risk of Electric
Shock
Double Insulation
Overvoltage Category I (CAT I):
Equipment for connection to circuits in which
measures are taken to limit the transient
overvoltages to an appropriate low lever.
Overvoltage Category II (CAT II):
Energy-consuming equipment to be
supplied from the fixed installation.
Overvoltage Category III (CAT III):
Equipment in fixed installations.
NOTES
BATTERY REPLACEMENT
1.
Turn the power off and remove the test leads from
the clamp meter.
2.
Remove the screw of the battery
cover.
3.
Lift and remove the battery
cover.
4.
Remove the old batteries.
5.
lnsert two (AA) batteries.
6.
Replace the battery cover and
secure the screw.
When the low battery symbol is displayed on the LCD or the LCD is dark,
replace the old batteries with two (AA) batteries.
18
3
DUTY:
Range
(<10KHz)
Resolution
(Hz)
Accuracy
Sensitivity
1-99%
0.1%
10d
10V
DIODE TEST:
Range
Resolution
Accuracy
Overload
Protection
0-1.999V
0.001V
2.5% 5dgts
AC 600V
+-
+-
SPECIFICATIONS CONTINUED
