10
7
1.
AC On/Off Switch
LCD turns on when AC switch
is on.
2.
LCD
Displays menus and charge results.
3.
KEYS
When each key is pressed a
beep sounds to assure contact
has been made
.
Y Enter
Key:
This key selects the main or next
menu. It also selects the cursor
line item and answers
yes
to a
charge progression.
+Up
Key:
This key moves the cursor up in
order to select a menu line item.
It also increments a value.
-Down
Key:
This key moves the cursor down
in order to select a menu line. It
also decrements a value.
N Esc
Key:
This key cancels a charge or
progression. It also returns to
the previous menu.
4.
Battery Charge Sequence
Indicating charge in progress,
charge complete, or see display for
additional information.
USB Port on the left side.
USB B Connection - Easy Link for
the DPC-2010
Connection
CONTROLS AND FUNCTIONS
CHARGE SEQUENCE cont.
>WHAT IS RATED
VOLTAGE OF BATT?
USE +/-. 6V
'Y' TO SELECT
If the DXC-2018CA measured a low
voltage it will ask you to select the
rated battery voltage 6V, 8V, or 12V.
Use + (Up) or - (Down) key to select
rated battery voltage. Press 'Y' to
continue.
After a short time, the display will
indicate the maximum time to
complete the charge.
You can press 'N' at any time to
stop the charge.
CHARGING
MAX TIME: 0:22
'N' TO STOP
Summary Screen
>STARTING STANDRD
TEMP. 70°F FAST
RATED CCA = 600
‘N’ OR ‘Y’
Confirm that the inputs are correct. Press
'Y' if they are correct. The charge will
start. Press 'N' to re-enter temp, battery
rating, battery type, or charge type.
CHOOSE BATT TYPE
STARTING STANDRD
USE +/-,
‘Y’ TO CONTINUE
CHOOSE CHRG TYPE
FAST CHARGE
USE +/-.
'Y' TO CONINUE
BATTERY TYPE OPTIONS:
STARTING STANDRD
OPTIMA RED
OPTIMA YELLOW
OPTIMA BLUE
STARTING AGM
DEEP CYCLE AGM
DEEP CYCLE STANDRD
GELL CELL
Press the (+Up) or (-Down) key to cycle through the
battery types. Press 'Y' when it matches the type of
battery you are charging.
Press the (+ Up) or (- Down) key to choose
FAST CHARGE or FULL CHARGE. Press 'Y' to
continue.
The battery rating displayed will be either the default
rating or the last entered rating will be displayed (this
setting can be changed at setup). Adjust the rating
using the +/- keys. Press 'Y' to continue.
ENTER RATED CCA
600
USE +/-.
‘Y’ TO CONTINUE.
