12
5
Inspect Starting System
Check starter, solenoid, and regulator for
loose connections, loose mounts, and frayed or cracked wires.
Important Note
A damaged battery must be replaced before proceeding.
Inspect Battery
for
terminal corrosion, loose
or broken posts, cracks
in the case, loose hold-
downs, low electrolyte
level, moisture, and dirt
around the terminals.
VISUAL CHECK
Inspect Belts
for cracks, glazed
surface and fraying. Tighten loose
belts.
INSPECTION
Valid automotive electrical system testing depends on
all the components being in good operating condition.
In addition, the battery MUST have sufficient charge for
testing. Carefully perform the following before attempting
any electrical diagnosis.
SETUP
Scroll Down to Setup, Select
setup by pressing Y
Select the temp in
Fahrenheit or Centigrade.
Choose between Spanish
or English Language.
Select the rating from CCA, MCA, CA,
AH, EN.
The charger factory default settings are English, F (Temp), CCA, 600
CCA. To change the settings use the setup menu's below.
>SET TEMPERATURE
SCALE: F.
USE +/-.
‘Y’ TO SELECT
>SET LANGUAGE:
ENGLISH.
USE +/-.
‘Y’ TO SELECT
>DEFAULT BATTERY
RATING: CCA
USE +/-.
‘Y’ TO SELECT
>SET DEFAULT CCA
AS: 600.
USE+/-
Y TO SELECT
You can also select the default rating
to be the last entered CCA value or a
particular amount such as 600 CCA.
CHARGE
REVIEW/PRINT
>SETUP
ABOUT
