background image

Warranty

AutoMate Scientific, Inc. warrants its products against defects of 

workmanship and/or material for ONE YEAR from the date of sale.  Any 

product that fails to perform as specified may be returned, freight pre-paid 

to the factory (with a written explanation of the problem) for examination 

and repair or replacement.  If it is defective, AutoMate Scientific will repair 

or replace (at our option) the product without charge and return it to you.

If the examination indicates that non-compatible fluid, destructive 

environment, accidental damage, modification or abusive practices have 

occurred, all labor, materials and freight costs shall be at the expense of the 

customer.

Due to the nature of clinical laboratory applications, AutoMate Scientific, 

Inc. will NOT accept the return of any products which have been used with 

HAZARDOUS MATERIALS or harmful environment.

This warranty is in lieu of all other warranties, whether oral or written, 

express or implied.  In no event shall AutoMate Scientific, Inc. or its 

licensor/licensees be liable for contingent, special, direct, indirect or 

consequential damages for the breach of any express or implied warranty 

or resulting from the use, failure or malfunction of any product, including 

damage to property and, to the fullest extent permitted by law, damages 

for personal injury, even if AutoMate Scientific, Inc. has been advised 

of the possibility of such damages or if this warranty is found to fail its 

essential purpose.  AutoMate Scientific, Inc’s liability is limited to the 

reimbursement of the cost of the product.  All other warranties, including, 

but not limited to warranties for fitness or merchantability for a particular 

purpose are expressly excluded. No verbal changes to this policy will be 

authorized.

AutoMate Scientific, Inc. manufacturers and sells goods in accordance with 

U.S. federal, state and local laws, but assumes no responsibility or liability 

for laws, regulations, duties, or taxes imposed by any foreign country.  All 

terms and conditions hereof shall be governed by the laws of the State of 

California.

AutoMate Scientific

®

R E A D Y F O R R E S E A R C H.

TM

 

 

European CE Technical Representative:

 

 

AutoMate Scientific

 

 

An der evang. Kirche 2, Bonn 53113, Germany

43

42

Содержание ValveLink 8.2

























Отзывы: