Auto Crane 6006EH Скачать руководство пользователя страница 21

Страница: 21 / 105

INSPECTION

REQUIREMENTS

3-1.0

8/16/05

REFERENCE ASME B30.5a AND OSHA 1910.180 FOR COMPLETE INSPECTION REQUIREMENTS

INSPECTION CLASSIFICATION

1. Initial inspection.

Prior to initial use, all new, altered, modified or

extensively repaired cranes shall be inspected by a

designated person to insure compliance with

provisions of this standard.

2. Regular inspection.

Inspection procedure for cranes in regular service

is divided into two general classifications based

upon the intervals at which inspection should be

performed. The intervals in turn are dependent

upon the nature of the components of the crane

and the degree of their exposure to wear,

deterioration, or malfunction. The two general

classifications are herein designated as "frequent"

and "periodic" with respective intervals between

inspections as defined below.
A. Frequent inspection - daily or before each use
B. Periodic inspection - one to twelve-month

intervals or as specifically recommended by the

manufacturer or qualified person.

FREQUENT INSPECTION

Inspections should also occur during operation for any

deficiencies that might appear between regular

inspections. Any deficiencies, such as those listed

below, shall be carefully examined and a

determination made as to whether they constitute a

hazard:

1. Inspect control mechanisms for maladjustment that

interferes with proper operation.

2. Inspect control mechanisms for excessive wear of

components and contamination by lubricants or

other foreign matter.

3. Inspect safety devices for malfunction.
4. Visually inspect all hydraulic hoses, particularly

those that flex in normal operation of crane

functions.

5. Inspect hooks and latches for deformation,

chemical damage, cracks, and wear. Refer to

ANSI/ASME B30.10.

6. Inspect for proper rope reeving.
7. Inspect electrical wiring and components for

malfunctioning, signs of excessive deterioration, dirt

and moisture accumulation.

8. Inspect hydraulic system for proper oil level and

leaks.

9. Inspect tires for recommended inflation pressure,

cuts and loose wheel nuts.

10. Inspect connecting pins and locking device for wear

damage and loose retaining bolts.

11. Inspect rope for gross damage, such as listed

below, which may be an immediate hazard.

A. Distortion such as kinking, crushing, un-

stranding, birdcaging, main strand displacement,

or core protrusion. Loss of rope diameter in a

short length or unevenness of outer strands

should be replaced.

B. General corrosion.

C. Broken or cut strands.

D. Use care when inspecting sections of rapid

deterioration around flange points, crossover

points, and repetitive pickup points on drums.

E. Inspect number, distribution, and type of visible

broken wires. Reference Rope Maintenance

section in the owner’s manual.

Continued use of rope depends upon good

judgment by a designated person in evaluating

remaining strength in a used rope after allowance

for deterioration disclosed by inspection. Continued

rope operation depends upon this remaining

strength.

DESIGNATED PERSONNEL SHALL
PERFORM INSPECTIONS ONLY.

Содержание 6006EH










































































































Результаты поиска

Содержание 6006EH

Отзывы:

Auto Crane 6006EH, Руководство пользователя, Страница: 21 / 105

Результаты поиска

Содержание 6006EH

Отзывы: