AUTHOR Alarm Kvant 120, Руководство по эксплуатации

Страница: 7 / 32

7
The emergency authorization code is indicated on the
first page of this operating manual and consists of 3
digits.
To apply the emergency code switch the ignition On
and immediately Off as many times as indicated by the
appropriate digit of the code. The ignition switch on/
off time and the pause between the second switch on/
off operation should not exceed 5 seconds. Before you
enter the next digit you should pause at least 5 seconds
(but not more than 15 seconds) while the ignition is off.
The successful unlocking will be confirmed by the
signals of LED or buzzer with the 3 seconds interval and
the system will switch into the mode of the new PIN-
code record for 2 minutes. We recommend you to write
down the new PIN-code immediately (see p. 12), then
to turn the ignition Off (not less than for 10 seconds)
and turn it On again. After that you can authorize in
the system with new PIN-code. If there is no possibility
to write down the new PIN-code, you can start the car
driving immediately after the emergency unlocking.
Service mode
The service mode is used for temporary deactivation
of the anti-theft device when you give your car for the
maintenance (without giving away the PIN-code and
saying about the device).
The service mode activation
is carried out with the
ignition switched on or off (if the car identifies the
button been pressed when ignition is off).