6
Authorization (PIN-code entering)
ATTENTION!
The initial PIN-code is set by the
specialists of the service centre. For security purposes
before driving change the initial PIN-code for the new
one and memorize it (see page 12).
Enter the PIN-code using the buttons and sequence of
pressing that was saved in the system. You can enter
PIN-code before or after ignition starting (both ways
are allowed).
It is recommended to enter PIN-code just before you
start driving. The interval between the pressing of
the buttons shall not exceed 2 seconds. There is no
difference between long and short button pressing.
When PIN-code is correct the system will signal
twice by LED or alarm buzzer confirming successful
authorization after which you can start driving.
If PIN-code is entered incorrectly confirmation signals
will not fallow and the engine will be locked when you
start driving. The second attempt to enter PIN-code is
allowed only after 5 seconds from the failed attempt
of authorisation or after turning off the ignition for 3
seconds and starting the ignition again if PIN-code was
entered after the ignition was «on».
Emergency authorization
In case you have forgot saved PIN-code you may
apply the emergency authorization procedure to start
driving.
Содержание Kvant 120
