C
C
Attach the charger to the wall dock by inserting the mount-
ing screws (D) on the back of the charger into the two
upper mounting holes (C). Slide the charger downwards.
4
D
D
Screw the M5 x 12 screw (E) into the hole at the bottom of
the charger and tighten the screw to secure the charger
using the screwdriver type T25.
5
E
6
Hardwired Installation
The MaxiCharger AC Wallbox Home supports both rear entry and bottom entry wiring. Choose the most appropriate wiring
entry for your charger based on the placement of the wiring.
IMPORTANT:
1. Both the rear entry and bottom entry locations are on the left side of the charger. Ensure that you mount your charger in a
location where the power supply wiring can be easily accessed on the left side.
2. The rear entry wiring and rear entry Ethernet cable connection should be completed prior to mounting the charger to the
wall dock.
