37
2.3 RTK module
2.3.1 Use the RTK Module
1. Enable/Disable RTK Module
Go to the camera page of the Autel Explorer App, click the Settings button (
) in
the upper right corner, and select RTK to enable/disable RTK.
2. Use the Network RTK Service
You can connect the RTK module to the third-party network RTK server that
supports the NTRIP protocol for receiving and sending differential data. Make sure
that you turn on the remote controller and connect it to a network.
1. Make sure that the remote controller has already been connected to the
aircraft and the network.
2. Go to the camera page of the Autel Explorer App, click the Settings button (
)
in the upper right corner, select RTK, and then set the RTK service type to
"Network RTK". Autel Robotics has already provided the designated network
RTK package. You do not need to purchase it within the validity period. If the
package expires, you need to purchase it on your own.
3. Wait for the connection with the network RTK server to be set up. If the
network RTK status icon (
) appears in the menu options of the Settings
menu, the aircraft has already obtained and used the RTK data.
