11
Figure 2-8
Diagnostic Test
After the correct vehicle information is entered, the diagnostic testing
selection will display as below:
Figure 2-9
Auto Scan
Depending on the scan tool model
, Auto Scan
function will carry out an
overall scan to check the status of all systems or four systems (engine,
transmission, airbag and ABS) on the vehicle being tested. Selecting
Auto
Scan
will lead to retrieve the trouble codes in each system of the vehicle
one by one. It will take a few minutes to display.
Use the
UP/DOWN
scroll button to select
Auto Scan
from
Select an Option
menu, and press the
OK
button.
User is allowed to check the details of each system, quickly erase DTC, save
the data, and display DTC from the
Auto Scan
menu screen. To select the
options on the bottom, simply press the corresponding function button.
Save
– You can save the
Auto Scan
information as
“Vehicle Record”
so that you will not need to follow the vehicle selection process again
on the same vehicle in later tests.
Select An Option
1. Auto Scan
2. Control Unit
3. Vehicle Information