2
Receiving
unit
Transmitting
unit
INTRODUCTION TO E16 SERIES
Each E16 series radio remote control is in conformity
with the R&TTE 99/05/CE Directive and all its essential requisites.
Each radio remote control is also in conformity with the norms
given in the EC conformity declaration present in this manual.
Page 2
!
PERMITTED
USES: Material
lifting machines
(construction cranes,
industrial bridge cranes,
concrete pumps,
machines for
moving material in
general, . . . )
Industrial radio remote controls of the E16 series are
used to command machines from a distance. Each
industrial radio remote control is made up of a portable
transmitting unit, from which the user can remotely
control the machine, and a receiving unit installed on
board the machine itself.
The transmitting unit uses radio frequencies to
transmit a coded message which contains a value
called address. Each receiving unit can only decode
the messages coming from a transmitting unit with the
same address.
This excludes the possibility of an interference
activating any system function. If the radio frequency
transmission is disturbed, incorrect or interrupted, the
receiving unit autonomously stops the whole system.
To guarantee correct radio remote control operation, all current regulations regarding
safety at work and accident prevention should be respected. All current user country
national laws regarding the use of both the machine and the radio remote control MUST
ALWAYS be respected.
Autec cannot be held responsible if the radio remote control is installed on
applications that are different from those permitted or if used in working
conditions that do not respect prescribed standard.
LIE16MU1
!
FORBIDDEN
USES: Machines
installed in areas
where equipment with
explosion-proof charac-
teristics are being used
Machines for moving,
raising and
transporting
people
