AUTEC Air LK6, Оригинальное руководство пользователя, Страница: 9 / 16

AUTEC - Air series
General operating instructions 9
LILK6E00-01
6.2 Command activation
When the radio remote control is started, it is possible to move the pushbuttons and switches
corresponding to the command you want to perform.
The user must be properly trained about the symbols on the transmitting unit panel, to be
aware of the matching between actuators and movements on the machine (symbols used are
defined by the machine manufacturer according to the functions of the machine).
6.3 data Feedback Function
The user receives information and/or signals concerning the controlled machine by means
of the Data Feedback function.
Pay particular attention to LED indications during normal radio remote control operation: they
can be helpful to evaluate the machine's working status.
Any information signalled by Leds for the data Feedback function can never
be considered or used as a safety signal or for legal metrology.
When operating and moving the machine, remember that the radio remote
control does not intervene autonomously when potential hazardous
situations are signalled.
Specific machine conditions (i.e. load limits, limit switch, …) are signalled through the
illumination of the LEDs for the Data Feedback function .The signalled conditions depend
on the settings chosen by the machine manufacturer.
6.4 radio link interruption
When the radio link is incorrect or interrupted, the receiving unit autonomously stops the
radio remote control.
The green LED on the transmitting unit switches from blinking slowly to fast blinking or
steady on.
Press the START pushbutton to start the radio remote control.
6.5 Transmitting unit automatic switch off
The transmitting unit automatically switches off when:
-
the battery is flat (see paragraph 6.5.1)
-
the radio remote control is not used for a certain time (see paragraph 6.5.2)
Press the START pushbutton to start the radio remote control.