AUTEC Air LK6, Оригинальное руководство пользователя, Страница: 10 / 16

10
LILK6E00-01
Operation
AUTEC - Air series
6.5.1 Low battery
The transmitting unit indicates if the battery is not sufficiently charged (the red LED blinks fast):
-
the red LED blinks slowly (one blink per second): the battery has less than 1h run time.
-
the red LED blinks fast: the battery has a 10 minute run time from the first signal, after
which the transmitting unit automatically switches off.
The battery needs to be replaced with a charged one (see paragraph 7.1).
6.5.2 When the transmitting unit is not used
If the transmitting units remains started with no enabled commands, it will automatically
switch off after a predetermined time frame.This time frame is specified in the technical data
sheet (SWITCH-OFF).
Before the transmitting unit switches off automatically, the green and red LEDs blink alternating
for 30 seconds.
Activating any actuator corresponding to a movement command reduces the predetermined
automatic switch-off time (SWITCH-OFF) to zero.
6.6 Switching off the transmitting unit
The transmitting unit shall be switched off each time work is stopped
Voluntary transmitting unit's switch off occurs:
-
when the power keyswitch (if present) is turned anti-clockwise
-
when battery is removed (see paragraph 7.1.2)
-
when the STOP pushbutton is pressed.
7 Operation
7.1 Battery
The Air series' transmitting units can only be powered by Autec rechargeable
batteries.
see the battery charger manual enclosed in the packaging with the battery
charger for any warnings and instructions regarding the batteries.
7.1.1 Battery insertion
Push the battery towards the contacts on the transmitting unit and insert it inside the housing.