Autarco S2.1P, Инструкция по установке и эксплуатации, Страница: 8 / 10

4.3
Wiring
Use port 1 and 4 to supply power to the S2.1P-SMARTMETER.
Connect the meter with the supplied RS485 cable to the meter port of the inverter. You can only use the
RJ45 port for connecting the consumption meter to the inverter.
Install the current clamp on the phase cable that goes to the grid. Note the arrow on the current clamp and
make sure it is installed in the right direction.
8