Autarco S2.1P Скачать руководство пользователя страница 5

1.3 Intended Application

This manual applies to the following products;

S2.1P-SMARTMETER

For 1 phase inverters

Please note that all current inverter models excluding the UX Series are capable of internal power export
limitation using an external  current clamp or consumption meter.  The internal PELD functionality is only
applicable for systems with one inverter. Please see the relevant inverter series manual for more
information. External power export limitation with the help of the PELD  is possible with all inverters.

2. Preparation

2.1

Safety instructions

DANGER! Do not touch any internal components whilst the inverter is in operation.

NOTICE! Do not directly connect AC output of the inverter to any private AC equipment. The PV
inverter is designed to feed AC power directly into the public utility power grid.

WARNING! The installation, service, recycling and disposal of the inverters must be performed by
qualified personnel in compliance with national and local standards and regulations.
Please contact your dealer to get the information of an authorized repair facility for any maintenance
or repairmen.

Any unauthorized actions including modification of product functionality of any form will affect the
validation of warranty service; Autarco may deny the obligation of warranty service accordingly.

5

Содержание S2.1P











Отзывы: