INTEGRATED GUARD UNIT CENTRAL
6
User Guide
In any of the 3 cases, when a call is performed, the following messages may be
displayed on the screen:
•
When the call is performed, at the bottom left corner of the screen will appear the
message:
Calling to
.
•
If the handset is picket up in the flat, the message will change to:
Talking
.
•
If the handset is hung up in the SB or in the flat, or if the time for the conversation
overcomes, on top of the screen will appear in capitals and big size, the message:
END OF CALL
.
•
If the called Phone/Monitor doesn’t exist, it’s turned off or it’s damaged, the
message will be:
NOT AVAILABLE
.
•
If it is a system with SDL (SB is configured as external), and the SDL is the one
which it is damaged, the message will be:
NO REPLY
.
•
If the line is occupied with another conversation (in example, with an internal
panel), the message will be:
LINE ENGAGED
.
1.2. Call from Flats to Switchboard:
With the handset of the Phone/Monitor in the flat picked up, press the door-release
button (
³
). The monitor will not have video picture on the screen.
At the switchboard:
•
If data corresponding to the flat is registered in the database of the SB, this one will
ring and it will display this data on the screen. If the guard porter doesn’t attend the
call picking up the handset, it will be stored in the queue. If the guard porter rejects
the call (pressing key
1
without picking up the handset), it will not be added to the
queue.
•
If the Phone/Monitor that performs the call is not registered in the database, the SB
will ring showing the identification of the Phone/Monitor, and the one of the SDL if
that was the case. This call will not be stored in the queue if it is not attended.
•
If the switchboard is engaged or powered off, or the guard porter rejects the call, the
Phone/Monitor led will shine with red light and, in systems with SDL, short and
quick beeps will be heard (tones of line engaged).
•
The switchboard will always receive calls from flats in Standard, Direct and Not
Disturb modes. In Manager mode it can only receive calls from another switchboard
(see section 3).
When the SB receives a call from a flat, the following messages may appear on the
screen:
•
When the call is received, it will be shown in the left bottom corner of the screen
the message:
Request from
.
•
If the guard porter picks up the handset, message will change to:
Talking
.
•
If the handset is hung up in the SB or in the flat, or if the time for the conversation
overcomes, on top of the screen will appear in capitals and big size, the message:
END OF CALL
.
