INTEGRATED GUARD UNIT CENTRAL
16
User Guide
The software “auta Directory” must be run from a PC or a laptop. The program
allows creating a new database or loading an existing one to transmit it. The SB shows
the message “OK” each time a register is correctly received, and it increases a counter
on screen.
Once the transmission has finished, it is possible to exit from the “
Remote Entry
”
pressing the left arrow
Å
.
Figure 9
. Detail of the connection of the interface RS232 to the Connections Module of the SB.
Note:
In order to perform the load from PC it is indispensable that the SB will be
correctly connected to its connections module and powered up through it, by a 24 V dc
power supply.
Automatic Entry:
In this type of data load, it is the SB itself the one that generates
the call codes from the data facilitated by the installer. These data is introduced to the
SB through a series of questions that the system asks about the installation. Thus it is
possible to start up an installation in a very fast and simple way.
The SB follows this process:
•
First of all, the SB will ask if it is desired to erase the current directory. This is
advisable to avoid the duplicity of call codes. The erasure can be avoided
pressing the right arrow
Æ
.
•
If the SB is configured as
external
(see chapter 4.4.2.2) it will ask for the
number of SDLs of the installation. If it is
internal
, it will omit all reference to
the SDL.
•
Next, it will ask the number of plants of the first SDL. In the case of internal
installations, the question will refer to the total of the plants.
•
Once data about the SDL and plants is had, it will ask successively for the flats
of each plant. Then, the call codes of that plant are generated and it will ask for
the following plant.
•
When all the plants of a SDL have been completed, the process is repeated with
the following SDL until completing all of them.
During this process, on screen it is provided information about the SDL and the
plant corresponding to these questions, as well as the total amounts of them. Also the
data introduced in previous steps is remembered to make the process more agile.
