Austroflamm Clou Compact Pellet, Инструкция пользователя, Страница: 24 / 48

Clou Pellet / Clou Compact Pellet User instruction
22 English
7 Cleaning and maintenance
The combustion pot of your pellet stove must be emptied each time before starting the appliance. Only a
cleaned burn pot guarantees safe ignition when starting-up, and clean combustion. With the lifting tool sup-
plied (see illustrations below), the combustion pot can be easily and safely removed, and taken away for
emptying.
Since the cleaning intervals depend greatly on the place of installation and the operating hours of the stove,
the times given in the following table are only guidelines. Basically, the components listed below must be
cleaned in line with their degree of soiling.
Maintenance work at the end of the service-free operating hours must be carried out by an authorised ser-
vice engineer. Maintenance is essential after the service due date (service counter) has expired.
Cleaning the viewing window as required, but after 15 operating
hours at the latest
Removing any deposits adhering to the burn pot before each start up
Cleaning the combustion chamber weekly, as required
Cleaning the flue gas passes when the display indicates that a
service is due
Cleaning the augur shaft, pellet tank once a year or when the pellet in-
feed is visibly reduced
Replacing the stand-by battery CR2032 located in the
control unit every 2 years
Checking all seals (door, heat exchanger cover, ash box,
tank cap, etc.); replacing them if necessary. once a year
Cleaning the chimney in accordance with the chimney
sweep as specified by local regulations