21
5.5.5 Electrical Connection
If the HP is properly connected to the water supply and properly ventilated, the electrical connection follows.
CAUTION
The connection cable must only be connected to a Schuko plug socket (16A;
a.c.).
1
Compressor
2
Ventilator
3
El. heating rod
4
Safety thermostat
5
Condenser fan
6
High pressure switch
7
Temp. sensor water
8
Temp. sensor evaporator
n1
Ventilator speed – low (clamp 2+3
together to 11)
Connection of the circulating pump and PV release signal
n1
n2
id.: 17
1. Shut-off valve
2. Pressure reduction valve
3. Back-flow valve
4. Safety valve
5. Expansion vessel
6. Drainage Valve
7. Pump
8. Heat pump
9. Boiler
If the HP is properly connected to the water supply and properly ventilated, the electrical connection follows.
The connection cable must only be connected to a Schuko plug socket (16A;
9
Circulation pump connection
10
Power supply cable
11
Condenser compressor
12
Electronics relay board
13
Electronics display
14
Relay
15
Defrosting valve
Temp. sensor evaporator
16
PV release signal connection
17
Filter
low (clamp 2+3
n2
Ventilator speed - high (clamp 2 to 11 and
clamp 3 to 10)
Connection of the circulating pump and PV release signal
© Austria Email AG
id.: 17-14-35-1251-08 | 02.2016
Pressure reduction valve
Expansion vessel
If the HP is properly connected to the water supply and properly ventilated, the electrical connection follows.
The connection cable must only be connected to a Schuko plug socket (16A; 230 V
Circulation pump connection
Power supply cable
Condenser compressor
Electronics relay board
PV release signal connection
high (clamp 2 to 11 and
