manualshive.com logo in svg

AUSTRALIAN MONITOR 9323383020634, Инструкция по установке и эксплуатации, Страница: 20 / 32

Поделиться
Скачать
AUSTRALIAN MONITOR 9323383020634 Скачать руководство пользователя страница 20

ZONEMIX

 INSTALLATION AND OPERATION MANUAL

20

Accessory LED States

CONNECTING WALL PANEL AUDIO INPUTS

FRONT PANEL

The ZONEMIX accessory ports each have a single balanced audio input for use with a remote audio wall panel. This input is referred to 
as the LOCAL input.
Each accessory ports LOCAL input is locked to the corresponding output zone. E.g. Accessory Port 1 is the Local input for Zone 1
Connect any balanced audio source to the accessory port. 
Compatible wall panels include,

•  WPBT – Bluetooth audio receiver
•  WPML – MIC/Line active audio input
•   WPXLR – passive XLR audio input

 

Important: Only 1 audio input wall panel is supported per zone

Referring to the wiring guide section, the accessory port wiring for the LOCAL input is,

•  Pin 5 GND
•  Pin 7 Local Input +
•   Pin 8 Local Input - 

The WPBT must be paired to the ZONEMIX system which then instructs the wall panel to transmit mono audio out. If it is not paired it 
will transmit stereo out and you will only hear the left channel in the local input.

The front panel allows the control of various features in the ZONEMIX. However, these can be disabled if you wish to prevent end users 
from modifying the setup.

•  Disable input volume level control
•   Disable output volume level control
•  Disable preset recall/saving
•   Disable Audio Setup menu access
•   Disable System Setup menu access
•   Disable entire front panel.  

(Shows device name and display locked message)

CONNECTING WALL PANEL CONTROLLERS CONT.

LED Status

Meaning

Resolution

All LEDs on, once a second

Not Paired

Put accessory into pairing mode

All LEDs on every 0.2 seconds

Pairing Mode

Pair accessory with ZONEMIX using the PC control 
software

LED chase anti clockwise, one led 
on at a time (led changes every 0.5 
seconds)

Erasing firmware to prepare for 
new firmware 

Wait until the accessory has finished erasing

LED chase clockwise, one led on 
at a time (led changes every 0.5 
seconds)

Writing new firmware

Wair until the ZONEMIX has finished writing firmware 
to the accessory

Alternate left, right LEDs every 
500ms

Identify Mode

Press any button to cancel identify mode

Top left LED on once a second

Needs firmware download

Download new firmware to the accessory by pairing it 
to the system

All RED LEDs on

Master Override, Evac, Alert, 
Intruder Active (Wall panel disabled)

Wait until the master override has finished

Top left LED on (led change state 
every 2 seconds)

Fault

Return to service

Содержание 9323383020634

































Отзывы:

Нет отзывов