Wireless Fridge Thermometer Instruction Manual
Included in package:
1. The receiver unit display
2. The remote sensor (WH3)
3. Instruction Manual
4. Lead Clip
5. Adhesive Velcro
Functions:
●
Clock
●
Ambient Temperature
●
Fridge Temperature
●
Min/Max record of temperature
How to fix remote sensor
1. Use the Adhesive Velcro provided to fix the Transmitter unit to the outside of your fridge.
NEVER place the transmitter unit inside the fridge.
2. Place the sensor probe inside the fridge in a convenient location. It is recommended to
place probe towards a back corner of the fridge, where it will not be affected by pulling
product in and out of the fridge.
3. Use the Adhesive Velcro provided to fix your Wireless display in your desired location. (It
is advised not to attach to a metal surface, as this may interfere with signal)
Quick Setup
Note: Use good quality Alkaline batteries and avoid rechargeable batteries.
1. Place the batteries into the Transmitter sensor unit.
2. Place batteries into the Wireless display receiver unit.
3.
Do not press any keys until the Wireless display shows the data from transmitter
sensor unit.
4. If there is no temperature reading on the wireless dispaly unit, make sure the units are
within range of each other (Maximum 100 metres). If needed repeat the battery
installation procedure (step 1 & 2). If any key is pressed before the wireless display unit
receives the fridge temperature signal, you will need to follow the battery installation
procedure again.
Wait 10 seconds before you reinsert the batteries again to ensure
a proper reset.
