1. To Set Time Press SET key for 2 seconds.
○
24H clock will be displayed.
○
Press +key to select 24H or 12H time display mode.
○
Press SET key to confirm display mode selection. If 24H mode selected,
temperature will be displayed in Fahrenheit. If 12H mode, temperature will be
displayed in Celsius. After selecting the time display mode, the sensor unit will
update to the correct degree reading automatically: Now the hour digits are
flashing, press + key briefly to increment hour. If + key is pressed longer than 2
seconds, then hour digit will be incremented automatically in 4HZ speed.
○
Press SET key to confirm and now the minute digits will be flashing.
○
Press + key to set minute accordingly.
○
Press SET key to confirm the entered time. Seconds will be cleared to 0 internally
for synchronization.
2. Check Min/Max record.
○
Press MIN/MAX key (shared with SET key) in normal mode, MIN icon and
minimum indoor and outdoor channel temperature record will be displayed.
○
Press MIN/MAX key again. MAX logo and Max record will be displayed.
○
Press MIN/MAX key the third time, MAX logo will disappear and go back to normal
display mode.
3. Reset Min/Max record
○
Press RESET key (Shared with + key) during normal display mode for 2
seconds, Min/Max record will be reset to current temperature.
○
If key is pressed for longer than 30 seconds, the unit will switch itself to normal
display mode automatically.
Specification
●
Ambient (receiver unit) temperature range 0 degrees C to +60 degrees C.
●
Fridge (remote sensor) temperature range -40 degrees C to +65 Degrees C
●
Temperature ac/ 1.0 degrees C.
●
Power requirement (receiver) 2 x AA LR6 alkaline batteries.
●
Power requirement (transmitter) 2x AAA LR03 alkaline batteries.
●
Battery life
○
Approximately 24 months for receiver
○
Approximately 24 months for transmitter.
●
Transmission frequency 433MHZ
●
Transmission range 300 feet (100 metres) in open area.
Caution
Do not reverse polarity of the batteries
Do not attach receiver to metal surface.
WARRANTY PERIOD IS 6 MONTHS FROM PURCHASE DATE.
The warranty of this product will not be honoured if damage is caused by negligence, improper
use and or tampering.
Setting Operation
