AL
C UIM4PC
9150
7/
10
/13_
19
PERIODIC EXAMINATION:
•
It is important to conduct regular periodic examination of the product
because the safety of the user depends upon the continued efficiency &
durability of the product.
•
The frequency of examination should be at least once in a year however it
can be more than once if legislation requires, or frequency of use is high or
environmental conditions have an adverse effect on it eg excessive rain, sea
side environment, excessive heat etc.
•
It is emphasized that the examination be conducted only by a competent
personand strictly in accordance with the manufacturer’s periodic
examination procedures.
•
It is also advised that the competent person be duly trained and authorized
by the manufacturer.
•
Ensure that all markings on the product are legible and can be clearly read.
•
It is the responsibility of the user to keep the below record card updated by
entering the details mentioned in it.
•
User is advised to keep the User Instructions document for the life of product.
WARNING:
•
Inspection:
Visually inspect the system before each use to ensure that it is
in a serviceable condition and is operating correctly. If during inspection,
doubts are raised about the safety of the system or a component, these
should be replaced either by the manufacturer or a competent person.
•
Compatibility:
To optimize protection, in some instances it may be necessary
to use the tripod with suitable boots/gloves/helmet/hearing protection. In
this case, before carrying out the risk-related activity, consult your supplier
to ensure that all your protective products are compatible and suitable for
your application.
•
Storage And Transport:
When not in use, store the tripod in a well-ventilated
area away from heavily acidic or basic environment. Never place heavy
items on top of it. Also ensure that the tripod is stored away from chemically
hazardous environment. Preferably storage should be in a dry environment.
•
Repair:
If the product becomes damaged, it will NOT provide the optimum
level of protection, and therefore should be immediately either replaced or
repaired. Never use the damaged product. Repair is permitted, provided
that it is either done by the manufacturer or a competent repair centre or
individual approved by the manufacturer.
•
Cleaning:
In case of minor soiling, wipe the tripod with cotton cloth or a soft
brush. Do not use any abrasive material. For intensive cleaning wash the
tripod in water at a temperature between 30°C to 60°C by using a neutral
detergent (pH 7). The washing temperature should not exceed 60°C. Do not
use acidic or basic detergents.
•
Withdrawal From Use:
If the system has been used to arrest a fall, it should
be removed from service and returned to the manufacturer or a competent
repair centre for servicing and re testing.
AUSTLIFT TRIPOD DOUBLE HEAD
4
1300 100 120
www.austlift.com.au
