
Page 12
Temperature Display
The temperature displays can be seen on the display panel, located on
the front of the fryer above door. It displays the current temperature of the
oil in each tank.
OPERATION
Oil Level
A raised form on the inner left hand side of the left tank and the inner right
hand side of the right tank indicates the oil level range. The upper and
lower extremities of the raised form indicate the upper and lower oil level
limits.
The fryer should be filled with oil to a level which lies within the length of
the form. Please note the following.
•
The danger of fire exists if the oil level is below the minimum
indicated level.
•
The danger of surge boiling exists if the oil is above the
maximum indicated level.
•
The danger of surge boiling also exists if over-wet or too large a
load is used
Refer to the specifications page for the volume of oil required for your
particular model.
Filling with Liquid Oil
Fill the tank with the required volume of oil using the following procedure.
•
Ensure all controls are OFF, the drain valve is closed and the
elements are cold.
•
Place the strainer in position, lower the elements and place the fish
plate in position.
•
Fill the tank with the required volume of oil.
The fryer is now ready for cooking.
Содержание AF822 Twin Tank
