OPERATING INSTRUCTIONS
ON and OFF
Connect the power plug to the appropriate electrical socket outlet.
Press the ON/OFF button to turn the unit ON.
Press the ON/OFF button again to turn the unit OFF.
Note: In the event of a power failure
Once the power is restored after a power failure, the unit will
continue to operate at the selected settings prior to the power
failure. This includes the drying mode, swing function and time
remaining in timer mode.
Note: After turning the appliance OFF
After turning the unit OFF using the ON/OFF button, the fan will
continue to run for a two-minute period. This is a normal procedure
and helps to cool & protect the internal components.
During this two-minute period, DO NOT remove the power plug from
the power socket outlet; wait for the fan to stop running.
AUTO DRY MODE
Press the "AUTO DRY" key for dehumidification (general drying of your home or office).
Note: There may be times when the fan speeds are the same for AUTO and LOW.
AUTO itself is not a fan speed but a target relative humidity set point that uses
either the low or high fan speeds to reach its target of 55-60%RH.
If the relative humidity of the room is close to or within this range, then switching
between LOW and AUTO will make no difference to the fan speed.
AUTO
LOW
HIGH
MODE
AUTO
DESCRIPTION
To keep the room at a comfortable relative humidity (RH)
level
The unit automatically keeps room humidity at 55~60%RH
with automatic high or low fan speed.
LOW
To run low fan speed
The unit automatically dehumidifies in low fan speed and
low heater.
HIGH
Super dry mode to prevent damp, condensation & mould
The unit automatically keeps room humidity at 45~50%RH
to achieve quicker and efficient drying.
5
Full
Check
ON/OFF
Wide
Front
Up
8H
4H
2H
Turbo
Saving
High
Low
Auto
TIMER
SWING
DRY
MODE
LAUNDRY
MODE
