background image

1.5.7 HYDRAULIC 

CIRCUIT

A two-bodies gear pump with a 6 cc flow body for steering and a 8 cc flow body for the 

auxiliaries in standard machine and 8 cc flow body for steering an 18 cc for the auxiliaries 

in machine with Continuous and high flow (at 1500 rpm) connected to the hydrostatic 

pump. 

Two spool control valve and 1 solenoid selector for moving the auxiliary hydraulic take-off 

(if fitted).

Maximum service pressure: 240 bar.

32 l hydraulic fluid tank.

1.5.8 CAPACITY/DIMENSIONS

Unladen weight (with full tanks): 2400 kg. See machine identification plate.

Nominal load: 1350 kg.

Maximum height for lifting: 4000 mm

Rotation of the fork carriage (with the arm horizontal): from +68 º to -12º

Pay Load at maximum height and with load center at 500 mm. or 600 mm

Standard: 1350 Kg

Fork carriage with side-shift: 1250 Kg 

Fork carriage with hydraulic quick attach: 1150 Kg

Fork carriage with hydraulic quick attach and side-shift: 1000 Kg

Maximum Weight, 3500 kg. See machine identification plate.

Total width, 4WD version: 1410 mm

Maximum gradient (fully loaded) 26%

Outer turning radius (mm) for the 4WD version: 2982 mm

1.5.9 FORKS

Floating

Dimensions: 1000 x 100 x 35 mm

1.5.10 ELECTRICAL 

EQUIPMENT

Electrical starting motor of 1.0 Kw

-  12V /70Ah battery.

-  12V / 360W alternator.

-  Diesel pre-heating plugs.

- Rotating beacon

- Horn

-  Acoustic warning for reverse direction.

1.5.11  VIBRATION AND NOISE LEVELS

Sound level:

Guaranteed sound level (as per directive 2000/14/EC on noise emission in the 

environment by   equipment for use outdoors):

 

• Lwa = 103 dB (A)

Acoustic pressure in the operator’s cab:

Weighted sound level (A) measured as per standards EN 12053 and ISO 4871:

 

• Lpa = 85 dB (A)

 

• Measuring uncertainty: 2.56 dB (A)

Level of vibrations generated by the machine:

Mean quadratic value weighted on the basis of the acceleration applied to the upper 

members: < 2.5 m/s

2

Mean quadratic value weighted on the basis of the acceleration applied to the body: 

< 0.5 m/s

2

.

TAURULIFT T144H x4 Plus

  

Содержание plus T 144 H


















































Отзывы: