AUSA D 201 RH Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 80

background image

D201RH / RHS / RHG / RHGS

32

Dumper Operation



Mechanical verifications

-  Tire pressure and condition of the tread.
-  Condition of the bucket and lifting mechanism.
-  If fitted, bucket rotation and shovel lifting mechanisms.
- Brakes.
-  Leaks in the hydraulic, coolant, fuel circuits, etc.
-  All guards, caps and safety stops are correctly positioned and securely fastened.
-  Absence of cracks and other structural defects visible at first glance.
-  Check fluid levels:

• Fuel.

• Hydraulic circuit fluid.

• Coolant circuit fluid.

- Check battery connections and level of electrolyte.
- Check the engine components when the engine is switched off. Check the

fastenings.

- Ensure that the engine cover is correctly closed.



Operator position verifications

- Check that informative and safety plates on the dumper are clean and in good

condition.

- Clean and check lighting and signalling system are operating correctly (



).

-  Check that all the controls are operating correctly.
-  Check that the steering moves freely.
-  Depress the throttle pedal several times to ensure that it moves freely. It should

always return to the initial position.

- Press the brake pedal to ensure that the brakes are working correctly. It should

always return to the initial position.

- Check that alarm and signalling devices are operating correctly (for example:

acoustic warning, air intake filter clogged warning, etc.)

- Check the starting switch, headlamps, indicators, side lights, audible reverse

warning signal (if fitted).



Seat and seatbelt verifications

- Adjust the seat to your build.
- Carefully inspect the condition of the seatbelt, paying special attention to:

• Cuts or fraying on the belt.

• Wear or damage to the fastenings including the anchorage points.

• Poor functioning of the buckle or automatic reel device.

• Loose stitching.

- Start the engine and drive gently several meters; press the brake pedal to ensure

that the braking system operates correctly.

WARNING

Correct any problems before using the dumper. Where necessary, refer the
problem to an authorized AUSA dealer

«
...
32
33
34
35
36
...
»

Содержание D 201 RH

















































































Отзывы:

Нет отзывов

Похожие инструкции для D 201 RH

Бренд: Komatsu Страницы: 6

Бренд: Komatsu Страницы: 6

Бренд: Trane Страницы: 40

EQ1040GLJ4-CMD1-D

Бренд: DongFeng Страницы: 75

Бренд: MARCOLIN Страницы: 48

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды