AUSA C300H, Руководство оператора

Страница: 78 / 140

C300H / C300HI / C300H x4 / C300HI x4
C350H / C350HI / C350H x4 / C350HI x4
76
 Forklift nominal load (fig. 1)
The Rated Capacity of this forklift is the weight the machine is capable of lifting under
safe operating conditions. The lifting capacity of a forklift is determined by the height
and weight limits of the load. Poor ground conditions as well as shape of the load may
reduce the weight that can be safely lifted. Overloading the forks can make the forklift
unstable, hard to handle, and may be in danger of tipping over.
Inspect the load you intend to lift and make certain it is within the limits of the Load
Capacity Chart located on the left hand side mudguard.

Load Center (fig. 1, 2)
To rate the lifting capacity of forklifts manufacturers have standardized on a certain size
of load. The rated capacity of this forklift is based on a cube measuring 39in (1 m.), in
all three dimensions with the center of gravity in the center of this cube. This is known as
24in (600 mm) or 20in (500 mm) load center from both the vertical face of the mast and
from the lifting surface of the forks. lt is important to keep load center in mind for as the
load center increases the lifting capacity of the forklift decreases.
 Load Capacity
Rough terrain use:
- With load center at 20in (500 mm) from vertical face of the forks, the C300H /
C300H x4 has a rated capacity of 6614lbs (3000 kg)
- With load center at 24in (600 mm) from vertical face of the forks, the C300H /
C300H x4 has a rated capacity of 6172lbs (2800 kg)
- With load center at 20in (500 mm) from vertical face of the forks, the C350H /
C350H x4 has a rated capacity of 7716lbs (3500 kg)
- With load center at 24in (600 mm) from vertical face of the forks, the C350H /
C350H x4 has a rated capacity of 7165lbs (3250 kg)
Industrial use:
- With load center at 20in (500 mm) from vertical face of the forks, the C300HI /
C300HI x4 has a rated capacity of 6614lbs (3000 kg)
- With load center at 24in (600 mm) from vertical face of the forks, the C300HI /
C300HI x4 has a rated capacity of 6172lbs (2800 kg)
- With load center at 20in (500 mm) from vertical face of the forks, the C350HI /
C350HI x4 has a rated capacity of 7716lbs (3500 kg)
- With load center at 24in (600 mm) from vertical face of the forks, the C350HI /
C350HI x4 has a rated capacity of 7165lbs (3250 kg)
If the load is too heavy split it and re-stack it. Use of attachments other than the pallet
forks that came with this machine may reduce lifting capacity and affect other machine
handling characteristics.
Reproduced copies of the Load Charts are included in the section TECNICAL
SPECIFICATIONS on this Operator’s and Safety Manual. Study the Load Capacity
Chart of your machine carefully and make certain you understand it before lifting loads
on the forks
(fig. 2)
1- Fork Face
2- Load Center
(fig. 1) 24in
39 in.
39 in.
39 in.
24 in. load center
(fig. 1) 600mm
1 m
1 m
1 m
load center
600 mm
(fig. 1) 500mm
1 m
1 m
1 m
load center
500 mm
Operating
the forklift