manualshive.com logo in svg

AUSA C300H, Руководство оператора

Поделиться
Скачать
AUSA C300H Скачать руководство пользователя страница 115

C300H / C300HI / C300H x4 /  C300HI x4
C350H / C350HI / C350H x4 /  C350HI x4

113

 

Wheels

WARNING

Unless it is imperative for the work to be carried out, given that the machine 
does not have suspension, the use of solid tyres is not recommended, as this 
increases the effect of impacts on the transmission and the operator.

Tyre pressure: Checking

If possible, the tyres should be inflated by specialised personnel.
The following operations are recommended, in particular for the front wheels:

Checking and inflating tyres: Safety measures

WARNING

The tyre pressures of the forklift are very high. Inflating the wheels could be 
dangerous if not performed with care.

-  Inflate the forklift tyres when cold to the pressure given by AUSA before starting 

the day’s work (See the section 

TECHNICAL SPECIFICATIONS

 in this 

Operator’s and Safety Manual).

-  Checking tyre pressures and inflation should be carried out with a manometer in 

good condition fitted with a nozzle with safety clip. The safety clip is essential for 
preventing the manometer nozzle from coming off the tyre valve during inflation, 
which could cause serious injury to the operator.

-  Use gloves to protect hands.

Wheel mounted on the machine

This should be checked while the forklift is on flat ground, the forks are lowered to rest 
position and the engine is switched off.

Wheel dismounted

-  Place the tyre in a cage or other device suitable for inflating tyres of this nature.

Wheel nuts: Tightening torque

The tightening torque of the wheel nuts should be checked every week. The exact values 
of the wheel nut torques are given in the attached table.

-  Use a torque wrench in good condition to check the tightening torque of the 

wheel nuts.

Periodic 

Maintenance 

Operations

Содержание C300H













































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды