www.auroramm.com
USERS GUIDE
Hardware
Safety Instructions
Please review the following safety precautions. If this is the first time using this model, then read this manual before installing
or using the product. If the product is not functioning properly, please contact your local dealer or Aurora for further
instructions.
The lightning symbol in the triangle is used to alert you to the presence of dangerous voltage inside the product
that may be sufficient to constitute a risk of electric shock to anyone opening the case. It is also used to indicate
improper installation or handling of the product that could damage the electrical system in the product or in other
equipment attached to the product.
The exclamation point in the triangle is used to alert you to important operating and maintenance instructions.
Failure to follow these instructions could result in injury to you or damage to the product.
Be careful with electricity:
Power Outlet:
To prevent electric shock, be sure the electrical plug used on the product power cord matches
the electrical outlet used to supply power to the Aurora product. Use the power adapter and power connection
cables designed for this unit.
Power Cord:
Be sure the power cord is routed so that it will not be stepped on or pinched by heavy items.
Lightning:
For protection from lightning or when the product is left unattended for an extended period,
disconnect it from the power source.
Also follow these precautions:
Ventilation:
Do not block ventilation slots, if applicable, on the product, or place any heavy object on top of
it. Blocking airflow could cause damage. Arrange components so that air can flow freely. Ensure that there is
adequate ventilation if the product is placed in a stand or cabinet. Put the product in a properly ventilated area,
away from direct sunlight or any source of heat.
Overheating:
Avoid stacking the Aurora product on top of a hot component, such as a power amplifier.
Risk of Fire:
Do not place unit on top of any easily combustible material, such as carpet or fabric.
Proper Connections:
Be sure all cables and equipment are connected to the unit as described in this manual.
Object Entry:
To avoid electric shock, never stick anything in the slots on the case, or remove the cover.
Water Exposure:
To reduce the risk of fire or electric shock, do not expose to rain or moisture.
Cleaning:
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device
before cleaning.
ESD:
Handle this unit with proper ESC care. Failure to do so can result in failure.
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two (2) conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
Trademarks
All trademarks in this document are the properties of their respective owners.