www.auroramm.com
1
USERS GUIDE
File Transfer
Files are transferred to the RXT series ReAX controllers using FTP.
FTP (File Transfer Protocol) is a method of transferring files to a web
server, such as the RXT device. Most FTP clients allow a simple drag-and-
drop interface for moving files between your computer, and the RXT
device. Core Studio has an integrated FTP upload available for publishing
directly to the RXT device.
Windows Explorer is also capable of performing basic FTP transfers.
While a full featured FTP client is suggested, you can use Windows
Explorer to transfer by typing the following address in the address bar:
ftp://admin:
[password]
@[IP Address] where
[password]
is the
administrative password of the RXT device and
[IP Address]
is its IP
address.
For a full FTP client, we suggest FileZilla, which is a free and open-source
FTP client:
https://filezilla-project.org/
Host Settings: At the bottom of the File Transfer page is a grey box which contains the necessary information to
configure an FTP client for this specific RXT device.
Kiosk
The RXT device is a Kiosk meaning access to the underlying Android system is locked. The user will not be able to exit
from this Kiosk by any means other than that provided by the password protected Kiosk functions.
By default, RXT will always boot to locked mode. If the device is not in locked mode, the user will be able to see a
‘Navigation bar’ at the bottom of the display.
Home Page
On a factory new device which has never had a Core Studio project
published, the default Home screen will appear. This screen contains
basic information about the RXT device including its IP address,
firmware version, system date and time, serial number, and the Setup
URL. The setup URL can be typed into a web browser on a computer on
the same LAN to access the
Once a Core Studio project has been published to the device, the
interface of that project will be the default Kiosk and this page will no
longer be displayed. At this point, this page can be accessed from a web browser by pointing to http://
[IP
Address]
/home where [IP Address] is the IP address of the RXT device. This page can be restored to the default by
setting the ‘Kiosk Home Page’ found in the
page to ‘http://localhost/home’.
The Home page also offer access to the following commands.
