14
User Guide
IPX-TC3-C, IPX-TC3-CF, IPX-TC3-DF Rear
Rear
•
48VDC – 48 Volt isolated power input.
•
10G SFP+ – Multi-mode or single mode SFP+ 10G modules for the IPBaseT
connectivity.
•
10G – RJ-45 10G network connection for the IPBaseT connectivity. Unit can be powered
with 10G PoE+ or PoH+ injector.
•
HDMI 2.0 In 1/2 – HDMI inputs.
•
HDMI 2.0 Out – HDMI Output to Display.
•
RS-232 – Serial port pass-through and control up to 115Kbps.
•
IR Out – IR output 30kHz-60kHz. Emitter must be mono 3.5mm TS.
•
Audio Line In/Out – Stereo audio input/Stereo de-embedded output.
•
Ethernet – 10/100/1000Mbps LAN. Can power the unit with PoE+ from injector or switch.
•
USB – 480Mbps USB 2.0 Micro to be connected to a host PC. Extreme USB SO-DIMM
option card (IPE-USB-2) must be installed for USB to function.
Inside
•
Option Card Slot for USB 2.0, ReAX, and Dante.
Note: The MAC address for the Dante or USB option will be on the card label.
