Aurora AU 323, Руководство пользователя

Страница: 10 / 15

AU
323
Steamer garment
ENG
10
Before the first use, check whether the technical
specifications listed on the product, the
parameters of the mains.
Used only for domestic purposes in accordance
with this manual.This product is not intended for
industrial use.
Do not use outdoors.
Use this product only for its intended use.
Never disassemble the product, if it is connected to
the Power Socket always disconnect the appliance
from the electrical outlet before cleaning or when
not in use.
Do not use the product if its parts (power cord, the
plug, the steam hose) are damaged.
To avoid the risk of electric shock and fire, do not
immerse the appliance or power cord in water
or any other liquid. If this occurs, immediately
disconnect it from the electrical outlet and contact
a Service Center for inspection.
This product is not intended for use by persons
(including children) with reduced physical, mental
ability or lack of experience or knowledge unless
they are supervised or instructed on the use of the
appliance by a person responsible for their safety.
Children should be supervised, to avoid playing
with the product.
Never leave the appliance unattended.
Before turning the steam iron, fill the water tank
first.
Do not use accessories which are not included in
the delivery.
Do not place the appliance on a table or a chair. It
should stand alone on the floor.
If the supply cord is damaged, its replacement, in
order to avoid danger, must be authorized service
center.
Do not attempt to service the product. If you
encounter problems, contact the nearest Service
Center.
Make sure that the power cord does not touch
sharp edges and hot surfaces.
Do not pull, twist, nothing on wrap the power
cord.
Do not place the product in the vicinity of a heat
source.
To reduce the risk of contact with hot steam, which
stands out from the steam vents, check appliance
before each use by holding it away from himself.
Do not fill the tank with hot water, as this can lead
to deformation of the tank.
Use distilled water.
Each time after use always switch off the appliance.
Beware of hot steam coming out of the spray gun
(fig. 1).
Do not disconnect the steam pipe during
operation (fig. 2).
Do not remove the lint brush during operation
(Fig. 3).
Do not add chemicals to the water tank (fig. 4).
Do not disassemble the product, if it is connected
to the network.
Do not pour the water with the product, if it is
connected to the network.
Before using, beware of a small amount of hot
water coming from the brush.
If the product for some time now at temperatures
below 0 º C, before turning it should be kept in
room temperature for at least 2 hours.
Warning! Do not use the appliance without water.
SECURITY MEASURES