Aurora AU 3029, Руководство пользователя

Страница: 11 / 12

AU
3029
Steam station iron
ENG
11
CARE AND CLEANING
Before cleaning the unit, make sure that the iron is unplugged and completely cool. Clean the appliance
with a damp cloth, then wipe dry. For cleaning the soles can not use abrasive cleaners.
STORAGE
SPECIFICATIONS
Before you take the iron for storing, make sure that the work surface is completely cooled.
Remove the remaining water in the tank, clean the appliance. Fasten steam hose in of winding. Set the iron
on the stand. Roll up the power cord and securing it.
Keep it in a cool dry place out of reach of children.
Power source 230 V, 50 Hz
Power 2000 Watt
VERTICAL STEAM
Vertical steam function can only be used in high-
temperature mode ironing when the thermostat
is set to «•••» or «MAX».
Hold the iron vertically at a distance 10-30 cm
from the clothes, press the steam supply.
CAUTION!
Not recommended vertical steaming
synthetic fabrics.
Never steam iron clothes on the person, as the
steam temperature is very high, use a coat hang-
er or a hanger.
ENDING IRON
Set the iron on the stand.
Set the thermostat to position «Min».
Unplug the iron. Let the iron cool down.
WARNING! When the operation is always neces-
sary to completely remove the water from the
tank.
SELF CLEANING
Using a funnel, fill the tank with water up to the
maximum mark, close the stopper. Set the ther-
mostat to position «MAX».
Connect the iron to the mains. Wait until the tem-
perature light. Unplug the iron.
Holding the iron horizontally over the sink, turn
on the steam switch, and press the steam button.
Steam and hot water, starting from the nozzles to
remove the dirt. It should shake the iron back and
forth. If heavily soiled, iron self-cleaning cycle
should be repeated.
To dry the soleplate , iron the piece of used cloth .