Aurora AL500 Series, Руководство пользователя

Страница: 4 / 10

- 3 -
2. Operation / Function chart
Mode Value Description
A*** 001~511 DMX address setting
Y F1
N
Not used
Y F2
N
Not used
Y F3
N
Not used
Y Sound Active F4
N
Y Auto F5
N
Y Master F6
N Slave
Y Beam show program F7
N Logo/geometric pattern program
Y Reverse LED Display F8
N Regular LED Display
3. Stand-Alone Operation (Auto, Sound Active Mode)
Auto mode setting
„
Press FUNC button
↑↓
and select F5. Then press VALU button
⊕
to set its value to Y.
„
Press SAVE button to save the setting. LED display would show PASS to confirm the setting is
saved well.
Auto program selection
There are 2 built-in auto programs to perform laser effects automatically. One is beam show
program and the other one is logo/geometric pattern program.
„
To perform beam show program, press FUNC button
↑↓
and select F7 and then press VALU
button
⊕
to set its value to Y. Press SAVE button to save the setting. LED display would
show PASS to confirm the setting is saved well.
„
To perform logo/geometric pattern program, press FUNC button
↑↓
and select F7 and then
press VALU button
⊖
to set its value to N. Press SAVE button to save the setting. L ED display
would show PASS to confirm the setting is saved well.
Sound Active mode
„
Press FUNC button
↑↓
and select F4. Then press VALU button
♁
to set its value to Y.
„
Press SAVE button to save the setting. LED display would show PASS to confirm the setting
is saved well.
„
Unit has built-in program that would react the bass of music to change effects.
※
In case that the value of both F4 and F5 are set to Y value, F5 has priority. So unit would run
Auto mode.