manualshive.com logo in svg

Aurora Design SCRF, Руководство пользователя и техническое руководство

Поделиться
Скачать
Aurora Design SCRF Скачать руководство пользователя страница 8

The internal Option Switch S1 has six controls allowing the user to set the 

operating mode of the converter. In order to change the switch settings, the cover 
must be removed from the unit. To do this, first remove all cables from the unit, 
including the power cable. Place the unit on it’s top, and remove the two, small 
phillips screws from the bottom. Flip the unit back over, and remove the top.

Caution!

 In the subsequent steps, make sure you are touching one of the outer 

metal rings on the phono or RF connectors to discharge any static electricity that 
may be present before proceeding. There are static sensitive devices inside the 
converter that can be damage if subjected to a static discharge. Failure to follow this 
procedure will result in damage to the unit!

Using a small tool such as a paper clip, carefully slide the desired switch to it’s 

new position being careful to not put an undue amount of force on the switch that 
might damage it or the circuit board. Once the desired switch settings have been 
achieved, replace the cover on the unit, and reinstall the two phillips screws.

Position 1 - Chroma Gain: (Model SCRF525M-SC Only)

This switch is used to control the Chroma Gain of the converter. In the OFF 

position, the gain is set to standard CCIR levels resulting in the output matching the 
input’s chroma levels. In the ON position, the gain is adjusted by +33% resulting in 
the output levels bein higher than the input levels. For instance, in this position, 
standard SMPTE 75% color bars will appear as fully saturated 100% color bars on 
the output.

Position 1 - Cross Color Filter: (Model SCRF405A-NTSC Only)

This switch is used to control the Cross Color Filter. In the OFF position, the filter 

is disabled, and the luminance channel is not modified. In the ON position, a -12dB 
filter at the chroma subcarrier frequency is added. This filter may help reduce dot 
crawl effects in the composite output. The filter characteristics match thos of the 
orignal BBC specification.

Position 1 - Not Used: (All other models)

This switch is currently not used and is for future expansion.

Position 2 - Color Select: (SCRF525M-SC & SCRF405A-NTSC)

This switch is used to select the output mode of the converter between color and 

monochrome. In the OFF position, the converter will output a color signal. When this 
switch is ON, the converter will output a monochrome signal.

Introduction                                                                                                               

8

Содержание SCRF


































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды