manualshive.com logo in svg

Aurora Design SCRF, Руководство пользователя и техническое руководство

Поделиться
Скачать
Aurora Design SCRF Скачать руководство пользователя страница 10

Position 4 - Audio Tone Disable: (All models)

This switch is used to disable the Audio Tone in the default mode. When this 

switch is OFF the Audio Tone will output when no valid video source is connected to 
the converter. When this switch is ON, the Audio Tone will be disabled. This can be 
usefull if other audio is connected to the converter and the Audio Tone is not desired.

Position 5 - Sleep Disable: (All models)

This switch is used to disable the Sleep Mode. In the OFF position the Sleep Mode 

will operate normally as discussed in the next section. In the ON position, the Sleep 
Mode will be disabled, and the unit will not go to sleep. This can be usefull when 
using the unit as a test pattern generator and no video input signal is connected.

Position 6 - Converter Bypass: (All models)

This switch is used to bypass the internal Standards Converter, and use the unit as 

a stand alone RF Modulator. In the OFF position, the converter and modulator 
operate normally. In the ON position, the converter is bypassed, and the video signal 
on the composite input connector is sent directly to the modulator.

R45 - AM Audio RF Carrier Control:

This trimmer is used to set the initial level of the audio carrier for RF Systems that 

use AM modulation. For RF Systems that use FM modulation, the level is set 
automatically, and this trimmer has no effect. This control is set at the factory and 
should never need adjustment.

C53 - Sound Trap Adjust:

This trimmer is used to set the Sound Trap Filter to keep video frequencies out of 

the audio carrier. This control is set at the factory and should never need adjustment.

Operating Modes

Normal Full Operating Mode:

When valid video is present and an RF Channel is selected, the Status LED will 

show a Solid light, and the unit will output converted video on the composite output 
connector and on the RF connector. This is the most common operating mode.

Introduction                                                                                                               

10

Содержание SCRF


































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды