Auriol Z29962C, Инструкции по эксплуатации и безопасности

Страница: 78 / 112

78 GB/MT
Q
Setting up the external sensor
Inserting the batteries:
j
Remove the battery compartment cover from
the back of the external sensor.
j
Insert two 1.5 V batteries (AA) (included) in
the battery compartment
27
.
note:
make sure that the polarity is correct. This
is indicated inside the battery compartment
27
(see Fig. C).
– The external sensor is now ready for operation
and the indicator LED 25 will flash.
j
Close the battery compartment cover.
Q
Setting up the weather station
Inserting the batteries:
j
Open the battery compartment cover on the
back of the weather station.
j
Place two 1.5 V batteries (AA) (included) in
the battery compartment
21 .
note: take care that the polarity is correct. This
is indicated inside the battery compartment 21
(see Fig. B).
j
Close the battery compartment cover.
As soon as the batteries have been inserted, the
LCD indicates the indoor temperature
5
and the
humidity 3 . The weather station starts to receive
the signal from the external sensor. When it has
successfully received the external sensor signal, the
outdoor temperature
7
appears on the LCD after
around 1 minute.
note: do not alter the position of the weather station
when it is picking up the signal, as this can interfere
with reception.