Auriol ian 91679, Инструкции по эксплуатации и безопасности

Страница: 14 / 53

14 GB/CY
Setting up the devices
ATTENTION:
First start the outdoor sensor, then the base station.
If possible, do not expose the outdoor sensor or base station to di-
rect sunlight.
The base station as well as the outdoor sensor can be hung by the
eyebolt
4
or
10
. Or flip out the stand
6
or
11
. on either device to
place the device on a horizontal, level surface.
Starting the outdoor sensor/
changing batteries
Open the battery compartment
12
on the back of the outdoor
sensor by sliding the battery cover
9
in the direction of the arrow.
When changing batteries first remove the old batteries.
Insert the new batteries, type LR03, in the battery compartment
12
.
Check the polarity of the battery during insertion. This is indicated in
the battery compartment.
Close the battery cover.
The signal LED
8
at the front of the outdoor sensor will briefly light
up. The signal LED will then flash about twice a minute, indicating
wireless transmission.
Starting the base station/changing batteries
Open the battery cover
5
at the back of the base station by pulling
up on the tab at the bottom of the battery compartment.
When changing batteries first remove the old batteries.
91679_aur_Funk-Wetterstation_Content_RO.indd 14 28.06.13 11:57