10 GB
2. Press and keep pressed the ALARM SET button
for approx. 3 seconds. The year display will
flash.
3. Press the UP
25
or DOWN button
24
to set
the desired value.
4. Press the ALARM SET button to confirm your
setting. The month display flashes.
5. Repeat the above step 3 and 4 to set the
values for month, date, hour and minute.
Activating / Deactivating the
Schedule Alarm (TA)
1. Press the ALARM SET button
27
three times.
“TA” will be displayed in the display.
2. Press the ALARM ON / OFF button
29
once.
The Schedule alarm symbol
1
will be dis-
played to indicate that the Schedule alarm is
activated.
3. Press the ALARM ON / OFF button again
causes the Schedule alarm symbol
to
cease to be displayed. The schedule alarm is
deactivated.
Switching off the alarm signal
Press any button except the SNOOZE button
18
to stop the alarm signal sounding. You do not
have to reactivate the alarm. It reactivates itself
automatically according to the weekly rhythm.
Note:
The alarm signal switches itself off after
2 minutes.
Displaying the temperature
in °C / °F
The current indoor air temperature
7
is indicated
on the LCD.
Press the °C / °F button
20
to switch between
the Celsius and Fahrenheit temperature scales.
Moon phase
The product shows the current moon phase
8
in
the LC display.
It uses the following symbols:
Full moon
Waning
gibbous
Last quarter
Waning
crescent
New moon
Waxing
crescent
First quarter
Waxing
gibbous
Displaying summertime
Summertime is automatically indicated on the LCD by
the summertime icon
6
. The product receives
the information as to whether it is summertime or
not from the DCF radio signal.
Note:
Reception of the radio signal may be seriously
disrupted in reinforced concrete buildings.
Setting the timer
Press and hold the °C / °F button
20
for ap-
prox. 3 seconds. The Timer symbol
2
will be displayed.
Press UP button
25
to change the values for
hours and DOWN button
24
to change the
values for minutes.
Hint:
If you press and hold down the UP or
DOWN, you accelerate the process and reach
the desired value more quickly.
Press the WAVE button
19
to start the timer.
The timer now begins counting down and the
Timer symbol
2
is flashing.
You can press the WAVE button again
anytime to stop the timer from counting down.
