8 GB
Do not place the product anywhere near to
sources of interference such as televisions,
computers, thick walls, etc. These may hinder
reception of the radio signal.
Inserting or replacing batteries
The battery symbol
5
appears in the LC dis-
play if the batteries are too weak. Make sure you
replace the batteries at the earliest opportunity.
The product starts to receive the radio time signal
as soon as the batteries are inserted.
Note:
Do not alter the position of the product during
reception of the signal. This may disrupt reception.
Radio time signal (DCF):
The DCF signal (time signal transmission) consists
of time pulses broadcast from one of the most accu-
rate clocks in the world. It is situated near Frankfurt /
Main, Germany.
Your product receives these signals under ideal
conditions up to a distance of approx. 1,500 km
around Frankfurt / Main. Reception of the radio sig-
nal generally takes approx. 3–10 minutes.
If it does not work properly, restart the radio
signal reception process. To do this, keep the
WAVE button
19
pressed for approx. 3 sec-
onds.
Reception can be considerably impaired by obstacles
(e.g. concrete walls) or sources of interference (e.g.
other electrical devices). If necessary, change the
location of the product (e.g. by putting it near a
window) if you have problems with reception.
Operation
Reception of DCF radio signal
The product automatically starts to search for the
DCF radio signal. The radio icon
13
on the LCD
indicates that the product is searching for the radio
signal.
It is also possible to start reception of the DCF radio
signal manually on the product.
Press and keep pressed the WAVE button
19
for longer than 3 seconds. The product attempts
to receive the DCF radio time signal. This pro-
cess takes several minutes and is indicated in
the LC display by a flashing radio symbol .
Note:
If the product cannot pick up the DCF radio
signal on account of an error, it is also possible to
set the time manually. As soon as reception of the
DCF signal is successful, the manual settings are
overwritten.
Changing basic settings
1. Press and keep pressed the WAVE button
19
for
approx. 3 seconds. The radio symbol
13
flashes.
2. Press and keep pressed the WAVE button again
for approx. 3 seconds to stop the reception of
the radio time signal.
3. Press and keep pressed the SET button
26
for
approx. 3 seconds. The acronym for the current
language flashes in the day of the week dis-
play
9
.
4. Set the desired language by pressing the UP
25
or DOWN button
24
.
5. Confirm your settings by pressing the SET button.
The time display flashes.
6. Repeat step 4 and 5 to set the values for year,
month, day, hour, minute, time zone and DCF
ON / OFF.
