12
13
4-4-2 Charging Cradle
Status charging charging complete
Charging Lamp
Red
Green
NOTE
If the printer is not properly mounted on the charging cradle, the red lamp will blink.
Remove and reinsert the battery.
4-5 Set Cradle Usage
1. Place the printer into the charging cradle as shown above.
2. Connect the DC JACK to the charging cradle.
3. Plug the power cord into an electrical outlet.
4. Once the charging is completed, remove the printer from the charging cradle.
CHARGING (RED ON)
ERROR (RED Flicker)
CHARGING COMPLETE
(GREEN ON)
1
2
Press the PUSH button to pop out
the cradle connector.
Align the second cradle with the connector of the existing cradle,
and connect the cradles by pressing down.
(To disassemble, repeat these steps in reverse order)
The charging status LED
NOTE
1 Power supply can be charge up
to 4 cradles in a set
