18
19
Upon initial installation or for
troubleshooting, you can run the diagnostic
test to get information about:
Firmware version, emulation, codepage,
sensor settings, interface settings, etc.
If no issues are found with the diagnostic
test, examine other devices and software.
The diagnostic test is working
independently of devices and software.
●
Motor protection from being overheated
To prevent the motor from overheating,
stop the printer for at least 30 seconds after
continuously printing 1.5 meters.
Self-Test Printout Sample
5. Peripheral Connection
This product can communicate with other devices via Bluetooth,
Wi-Fi, or a communication cable.
5-1. Bluetooth Connection
1. The Printer can be connected to devices equipped with Bluetooth communication
capabilities (PDAs, PCs, etc.).
2. Use the Bluetooth connection function supported by the device to connect
to the printer.
NOTE
- This model supports numeric comparison function.
- Please refer to the configuration manual for details.
Optional
